This protector can be used to give real-time protection in meeting rooms, boardrooms etc. against the threat caused from radio eavesdropping devices. After a first swept of the meeting room for eavesdropping devices, the system can be deployed to ensure that no RF interception device is activated during the meeting. This system is available in 2 versions: • a fully portable solution including a sensor, a semi-ruggedised laptop (with software) and power supplies housed in a smart briefcase • a semi-deployable solution comprising a sensor, a semi-ruggedisesd laptop (with software), power supplies, sensor tripod and system carrying case

Specifications
Broadband detector (channel A)
-Frequency: 10 MHz to 2500 MHz
-Sensitivity: higher than -60 dBm
-Dynamic Range: higher than 50 dB
-Detector algorithms: Video (PAL, NTSC), GSM, DECT, 802.11 g(WiFi), Bluetooth, 3G (UMTS)

Broadband detector (channel B)
-Frequency: 2400 MHz to 2483.5 MHz
-Sensitivity: higher than -60 dBm
-Dynamic range: higher than 50 dB
-Detector algorithms: Video (PAL, NTSC), GSM,DECT, 802.11g (WiFi), Bluetooth, 3G (UMTS)

Harmonic Receiver (Channel C)
-Frequency band 0:
-12,8 MHz to 2500 MHz (approx.)
-band 1: 2500 MHz to 5000 MHz (approx.)
-band 2: 5000 MHz to 7500 MHz (approx.)
-band 3: 7500 MHz to 10000 MHz (approx.
-Resolution: 8 kHz
-Sensitivity: higher than -50 dBm (10dB SNR)
-Dynamic range: higher than 50 dB (noise floor to P1dB)
-Sweep rate: band 0,1 , 2 and 3 approx. every 250 mS

Sensor Inputs & Outputs
-External power: 2,5 mm centre positive
-Network: RJ45, Ethernet
-Alarm outputs: green, blue, red LEDs, audio signal

Sensor power
-External power: 12V DC at 4A, reverse polarity, protected against overvoltage
Sensor mechanical
-Sensor size: 280 mm x 200 mm x 110 mm
-Sensor weight. < 2,5 kg

Sensor approvals
-EU EN 300 440-1, EN 301 489-3
-FCC Part 15B, unintentional radiators